Milling the wave steel fiber
Detailed Photos
Description:
Daye ® milling wave steel fiber is a relatively special kind of metal fiber, in the concrete compressive strength, tensile strength, bending strength, impact strength, toughness, toughness, impact toughness and other properties have been improved by snapping.Widely used in highway pavement, airport pavement, bridge deck pavement, bridge expansion joints, water conservancy and hydropower and other major infrastructure projects.
Product characteristics
1. Have high strength, high safety and reliability. 2. High durability. 3. It is lightweight. 4. Stable quality, easy to shape, beautiful appearance. 5. Long service life and obvious benefits for a long time. 6. Moderate project cost, excellent performance and price ratio.
economic superiority
1. Under the same strength can reduce the amount of concrete by 30%~50%; 2. Can replace or partially replace the reinforcement or reduce the diameter of the reinforcement by 1~2mm; 3. It can make the construction period shortened by more than 25%, especially suitable for more projects requiring continuous and rapid concrete pouring; 4. Mixing construction with ordinary concrete without need to add equipment
XOREX-LSF38-40/50
| Fiber equivalent diameter |
0.8-1.0mm |
| Fiber equivalent length |
38-40mm / 50mm (+/-1); |
| fibre tensile strength |
>800MPa/>1150MPa |
| |
|
| modulus of elasticity |
GPa |
| modulus of elasticity |
7.9g/cm3 |
| appearance |
,,Wavy, rough on one side and smooth on one side |
| surface |
bright |
| safe |
,,Non-toxic, non-stimulating, and neutral |
Cut Sheet steel fiber
SHEAR CUT-LSF30
Description:
DAYE shear steel fiber, before cutting, a special small slitting machine is used to cut the thin cold rolled coil into strip coils. The width of strip coils is the same as the length of steel fiber, and then the strip coils are continuously fed into a rotating cutter or ordinary punch to cut them off (As shown in Figure 2-3,b). The axis of the rotating cutter is perpendicular to the feed direction of the thin plate.
The raw material for production is cold rolled steel plate which is generally annealed. Unannealed cold rolled steel plate can also be used to improve the strength.
Main Features:
- 1. High tensile strength.
- 2. Easy Dispersion.
- 3. Good adhesion to concrete.
Technical Parameters
| Equivalent Diameter |
0.55mm |
| Equivalent Length |
32mm±2mm |
| Tensile Strength |
>380MPa |
| Aspect Ratio |
/ |
| Appearance |
Flat&Long strip, serrated at the shear |
){kind=link}