Uhpc Polypropylene Fiber for Repair Mortar Reinforcement Concrete PP Fiber Construction Material

• Customization: Available
• Application: Building Surface
• Material: Polypropylene Fiber
• Model NO.: pp12
• Type: Polypropylene Fiber
• Product Name: Polypropylene Fiber
• Appearance: White, or Black, Embossed
• Acid&Alkali Resistance: Excellent
• Fiber Dimension: 65mm
• Melt Flow: 3.5
• Density: 0.91g/cm3
• Melt Point: 170ºC
• Modulus: >10 Gmpa
• Minimum Tensile Strength: >650 MPa
• Moisture Content: ≤0%
• Application Scenarios: Industrial Architecture
• Design Style: Modern
• Production Time: 15-20 Days
• Advantage: High Quality
• Function: Strengthen, Waterproof
• Transport Package: Paper Bag Pallet Container
• Specification: Polypropylene
• Trademark: DAYE
• Origin: Jiangxi Ganzhou
• HS Code: 7326201000
• Production Capacity: 10000 Tons/Year
• Package Size: 25.00cm * 20.00cm * 12.00cm
• Package Gross Weight: 1.200kg

Product Description

Product Description

 Polypropylene Fiber

(PP12)

                
Description
    The fibres are Made of Polypropylene.
Features

• Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
• Cost saving,Is easier to use,to disperse and safe to handle.
• Can be used in highly corrosive circumstance.
• The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.
• The toughness of macro synthetic fibre is less stronger than steel fibre.But test has shown slabs on grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibres per cubic meter, in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete. Synthetic fibres achieve greater strength and ductility in the matrix.

Estimating Data
    The dosage rate is dependent on the application however the minimum dosage range
is 3kg/m3-10kg/m3.
Typical Application
    Shotcrete, and engineering industries, concrete project,like being used in base,ground, bridge, dam, especially where relatively large-scale deformations may be expected, such as in mining engineering environment.
Technical Information

Minimum Tensile Strength	>650 MPa
Modulus	>10 GMPa
Fibre dimension	L: 65mm;
Melt Point	170ºC
Density	0.91g/cm^3
Melt flow	3.5
Acid&Alkali Resistance	Excellent
Moisture Content	≤0%
Appearance	White, or black,Embossed