Hydrophilir Modification Technology Concrete Fiber Uhpc Special Synthetic Fibre 6-12mm

• Customization: Available
• Function: Waterproof
• Prouduct Time: 15-20days
• Model NO.: POM12mm
• Color: White
• Appearance: Transparent Monofilament
• Benefit: Self Compact
• Material: Polypropylene Fiber
• Certification: CE, ISO
• After-sales Service: Yes
• Warranty: One Year
• Type: Fiber
• Transport Package: Pallet
• Specification: Fiber
• Trademark: DAYE
• Origin: China
• HS Code: 732620
• Production Capacity: 10000tons/Years

Product Description

 

Product Description

Description
The fibres are Made of Polypropylene.UHPC special synthetic fiber uses hydrophilicmodification technology for its surface treatmelIt has excellent dispersibility in UHPC, and hasgood bonding performance with cement matrixnaterials, which can effectively reduce and inhibitUHPC plastie shrinkage, drying shrinkage, Micro-crackscaused by temperature changes and other factors significantlyimprove crack resistance, toughening, impact resistance, fire and explosion resistance of UHPC.

Detailed Photos

 

Our Advantages

 

1. Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.
2. Cost saving,Is easier to use,to disperse and safe to handle.
3. Can be used in highly corrosive circumstance.
4. The surface has been embossed,which greatly improves the cohesive force between fibres and concrete,and also boosts shrinkage resistance and crack resistance.
5. The toughness of macro synthetic fibre is less stronger than steel fibre.But test has shown slabs on grade and pre-cast concrete predominately require a dosage rate of between 25kg-40kg of steel fibres per cubic meter, in comparison,using between 3kg-10kg of macro synthetic fibre per cubic meter of concrete. Synthetic fibres achieve greater strength and ductility in the matrix.

 

Benefits

No rusty
Excellent dispersity
Self compact
Light and Artistic
Colourfull

Typical Application
Shotcrete, and engineering industries, concrete project,like being used in base,ground, bridge, dam, especially where relatively large-scale deformations may be expected, such as in mining engineering environment.


Technical Information

Minimum Tensile Strength	>650 MPa
Modulus	>10 GMPa
Fibre dimension	L: 65mm;
Melt Point	170ºC
Density	0.91g/cm^3
Melt flow	3.5
Acid&Alkali Resistance	Excellent
Moisture Content	≤0%
Appearance	White, or black,Embossed

Guidelines for use
Dosage: the usual dosing amount is 5.0-50.0kg/m'(the corresponding volume dosing amount is0.4-4.0%%).Length: The length of UHPC should be 6-12mm,according to different thickness of componentsStirring: After mixing the UHPC powder and water to make the slurry evenly, add the fibers, an
then stir for 2 to 4 minutes, subject to the uniform dispersion of the fibers.
Curing: The construction and curing process of UHPC after adding fiber is exactly the same athe system without fiber.

Packaging & Shipping

10 or 20kg/big bag ,700kg pallet, 7000kg/20' container, 14000kg/40' container.