Technical Parameters
| Compressive Strength |
around 100 MPa(adding steel fiber) 28D |
| PH Value(1% Aqueous Solution) |
6 to 8 |
| Bulk Density |
300 to 600 g/L |
| Water Reducing Rate/% |
25 to 45 |
| Active Component |
Equal to or More Than 90% |
| Chloride Content/% |
<0.03 |
| Shape |
Powder |
| Alkali Content/% |
<3.0 |
| Solid Content |
98% |
| Sodium Sulfate Content/% |
<3.0 |
| Shelf Life |
3 to 4 Months |
Description:
Daye/Dura has introduced the factory produced UHPC. It addresses all the challenges that are faced by the site produced UHPC. It is designed on an optimum particle packing density concept employing nano technology, by selecting a right blend of particle sizes (from Nano to Macro) of all components such as binders, strength and quality enhancing additives, admixtures, fillers etc. Daye dry mix is supplied in bags, which just needs addition of specified quantity of water and coarse aggregates (optional) to specifications to get a
UHPC mix of
100 MPa and above cube compressive strength in 28 days. The product being factory produced under a strict QA / QC environment, the consistency in the quality and strength are guaranteed. The anomalies of site batched concrete are eliminated as Daye dry mix is pre-batched and pre-packed in hermetically sealed bags. The need for site addition of crucial constituent materials such as cement, high-performance admixtures and graded fillers, is obviated in Daye dry premix, which play a very important role in achieving strength and quality consistency.
Our UHPC mix has thixotropy. Casting concrete can flow during operational time. Construction worker can operate and cast anything before concrete solidifies which is still mortar. There are around 20 minutes to operate at 26 °C without ice water. What's more, there are around 10 minutes to operate at higher degrees. Furthermore, worker can operate slurry for about 1 hour after putting ice water. The mentioned operation means there is some time available to cast another panel after one is finished when we are using UHPC premix to cast concrete.
High water-reducing rate: It has excellent water-reducing rate and plasticity retention, and still has excellent water-reducing performance under low dosage. The effect is particularly significant in cement-based mortar, gypsum-based mortar and high-grade concrete. The water rate can reach 40%. Good dispersibility: It has excellent dispersing ability, which makes the slurry have excellent fluidity, cohesion and water retention, endows the material with excellent workability, improves construction efficiency and meets different construction requirements.
High adaptability: It has good adaptability with ordinary Portland cement, sulfoaluminate cement system, Portland cement, sulfo aluminate cement composite system, gypsum-based materials, etc., and can be used with other additives such as: Defoamer, retarder, redispersible latex powder, cellulose, etc. have good compatibility.
Early strength and high strength: It has excellent early strength and enhancement effects. Under the same conditions, the early strength and enhancement effects of this product are higher than other types of superplasticizers, and the dosage can be reduced under the same demand. High Durability: It can enhance the compactness of the hardened slurry, improve the impermeability, erosion resistance and chloride ion penetration resistance, improve shrinkage and creep properties, and reduce cracks.
Green and safe: It does not contain harmful substances and is an environment-friendly material.
·Multi-component engineered concrete composite made from polymer enhanced, fiber reinforced, high performance concrete.
· High strength allows for 0.5" panels for boulder applications and 1'' masonry panels (0.5''thick at mortar joints) for building outdoor kitchen with no substrate.
·Originally designed for extreme water features, requiring high performance with extreme load bearing capacity under a range of environmental stresses.
·Structural aesthetic panels are joined both chemically and mechanically with Dura patch mix, creating monolithic rock formation.
Characteristics of Panel Made of our UHPC drymix:
· 4x stronger than wet cast concrete .
· 6x times greater tensile strength -higher tensile strength creates impact resistant GFRC matrix.
· 2x-3x longer longevity than that of conventional concrete, with improved resistance to freeze/thaw, extreme heat, and weathering.
· Greater color adherence, UV stable.
· Virtually no efflorescence.
· Reduced spider cracking, with soft polymer cushion between hard particles.
Dosage:
1. The recommended dosage is 0.05-0.50% of the cementitious material, and the appropriate dosage is tested according to the change of the dry mix components.
2. It has good dispersibility and fluidity for cement when the dosage is low,when the dosage is greater than
0.12% to 0.22%, the fluidity of the slurry increases significantly.
Applications:
1. Gypsum building materials products
(1) Gypsum-based self-leveling mortar: It has good adaptability with phosphogypsum,
desulfurized gypsum, gypsum/cement composite system, etc.
(2) α high-strength gypsum products
(3) Gypsum partition boards
(4) Gypsum products;
2. Cement-based mortar
(1) Cement-based self-leveling mortar.
(2) Cement products: cement exhaust ducts, cement prefabricated
components, etc.
(3) Grouting materials, pressing slurry, repairing mortar, special early-strength mortar, etc.
3. Concrete of different strength grades
Such as UHPC ultra-high performance concrete, C60 - C120 and other high-grade concrete;
4. Dispersant
It is used as a dispersant in special fields such as waterproof coatings and pigments.
Packing and Storage:
1. 1000 kg per ton bag for bulk order, 25 kg/bag for experiment use, a 20ft container can load 24 to 26 tons.
2. 12 months under condition 5-42°C.
3. Storage and transportation should be carried out in cool and dry condition. Under high temperature and high humidity, product should be kept away from moisture and pressure to avoid coalescence or agglomeration.
4. If the product is not used up, the opened package must be sealed tightly to prevent moisture from ingress.
5. For product stored over shelf life, test confirmation should be done before use.
Standards:
Quality Assurance:
- ISO9001:2015
- CE (EN14889-1)
Company Profile
Ganzhou Daye Metallic Fibres Co., Ltd is established in 2002,specialized in manufacturing steel fiber more than 16 years, has accumulated rich experience in producing and exporting.
We are located in Economical and Technical Development zone, Ganzhou City of Jiangxi Province, enjoy a comfortable environment and convenient transportation, the nearest loading port is Shenzhen or Xiamen.
Our company plays a leading role in steel fiber industry, steel fiber types and specifications is comprehensive among Chinese manufacturer, including the Hooked Ends steel fiber, Micro steel fiber ,Flat heads steel fiber, Corrugate steel fiber, Straight steel fiber , Xorex steel fiber , and Stainless steel fiber.
Covering an area of 20,000 square meters ,our company is equipped with advanced product line and precise testing instruments , annual output steel fiber is over 10,000 metric tons.
Our company has achieved EC CERTIFICATE OF CONFORMITY in year 2006 and passed ISO9001 Quality System certification in year 2004. We passed strict testing supervised by National metallic quality supervise and testing centre. Our steel fiber meets the standards of ASTM A820 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete, European standard EN1 4 8 8 9-1 part 1, National standard steel fibers for fiber reinforced YB/T151-1999, and C E C S 3 8:2004 standards Technical specification for fiber reinforced concrete structures.
Our steel fiber has widely used in many important project such as Tunnel ,Dam, Bridge, industrial floor, Power Plant, rapid transit railway, Basement, and Anti-aircraft project and etc, are well sold to more than 28 provinces/cities in China and exported to Germany, Norway, Estonia, Austria, Italy, Portugal , America, Canada, Australia ,Pakistan, Malaysia, Thailand, and Nepal and etc. We have won high reputations from all of our clients for our steel fiber and service.
FAQ
1. who are we?
We are based in Jiangxi, China, start from 2002,sell to Southern Europe(30.00%),Southeast Asia(20.00%),South Asia(10.00%),Domestic Market(10.00%),Eastern Asia(5.00%),Eastern Europe(5.00%),Oceania(5.00%),North America(4.00%),South America(3.00%),Western Europe(3.00%),Northern Europe(2.00%),Mid East(2.00%),Central America(1.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Steel Fiber,PP Fiber,Silica Fume,Mixer machine,UHPC TOTAL SOLUTION
4. why should you buy from us not from other suppliers?
CE certified by TSUS , Steel fibres for concrete Group I Quality trusted by Lafargeholcim(France) and Dura. Factory with 16 years experience. UHPC TOTAL SOLUTIONS. Annual output STEEL FIBER 15,000MT, ULTRA HIGH PERFORMANCE CONCRETE dry-mix 20,000MT.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,DDP,DDU,Express Delivery,DAF,DES;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Japanese,Portuguese,German,Arabic,French,Russian,Korean,Hindi,Italian
Audited Supplier 
){kind=link}
){kind=link}